• 2021-01-27

Relying on its own innovation and development, SANYI has developed 12 series and more than 100 varieties of  resins with high quanlity, and expanded more and more extensive application fields. In 2020, COVID-19 was raging, Sanyi's annual output still reached 15000 tons, about 20000 cubic meters. Products classification 1. Strong acid cation exchange resin (SAC) 2. Weak acid cation exchange re...

• 2021-04-26

Ion exchange resin is a kind of insoluble polymer compound with functional group (active group of ion exchange), network structure, which  is also a kind of polymer that acts as a medium for ion exchange. Ion exchange resin provids a large surface area on and inside them, and the capture of ions is accompanied by the release of other ions, so this process is called ion exchange. According to ...

• 2021-06-08

In the electronic industry, from the cleaning of various electronic components to the preparation of a series of process solutions, high-quality pure water is needed, especially in the production of semiconductor devices and large-scale integrated circuits. Almost every process needs to be cleaned with ultrapure water. Ultra pure water plays an increasingly important role in the electronic industr...

• 2021-07-16

In industries such as thermal power plants, petroleum and chemical industries, microelectronics, nuclear, food and pharmaceutical industries, all require water close to the quality of distilled water. With the rapid development of industrial technology, not only the amount of water is increasing rapidly, but also the requirements for water quality are constantly increasing. So far, the ion exchang...

• 2021-09-30

Chemical desalination refers to the process in which various ions contained in water are removed by ion exchange reaction with ion exchange resin, also known as ion exchange demineralized water treatment. When various cations in the water react with the cation exchange resin, the water contains only hydrogen ions exchanged from the cation resin; After various anions in water react with anion excha...

• 2021-10-11

(1) The cation exchanger is located in front of the anion exchanger. The reasons are as follows: a. the exchange capacity of strong base anion exchange resin is low, and the ion exchange reaction efficiency of strong base anion resin in acidic water (H-type cation resin exchange water) is high, and the working exchange capacity can be fully utilized. b. After the raw water is exchanged by H-type c...

• 2021-11-01

The chemical desalting system is selected according to the raw water quality and effluent requirements through technical and economic comparison. A chemical desalination system is usually composed of some units. For example, the common primary chemical desalination system is composed of three units: cation exchange unit, decarbonization (carbon dioxide removal) unit and anion exchange unit. Each i...

• 2022-02-18

The exchange reaction of the ion exchange resin is similar to the replacement reaction in the solution. The exchangeable ions carried by the functional groups immobilized on the polymer backbone can be dissociated in the aqueous solution. For example, the hydrogen ions can be dissociated from the sulfonic acid resin. Such ions can move freely over a wide range and diffuse into the solution. At the...

• 2022-03-10

Application of ion exchange resin 1、 Water treatment The amount used for water treatment is large, accounting for more than 90% of the output of ion exchange resin. There are divalent calcium, magnesium ions and trivalent iron ions in industrial water, which is easy to scale pipelines and boilers. The process of removing these metal ions is called water softening. The early softening of water was ...

• 2022-06-21

In addition to conventional ion exchange resins, micron fine-grained ion exchange resins are also developing rapidly. This kind of resin is mainly used for chromatographic separation. Therefore, a sufficiently small particle size (100~400 mesh) and a relatively narrow particle size distribution are key technical indicators. Suspension polymerization can prepare spheres with diameters ranging from ...

• 2022-10-14

When the macroporous ion exchange resins is used as a porogen in a bad solvent, the properties, dosage and crosslinking degree of the porogen have significant effects on the pore structure of the copolymer. With the increase of the amount of divinylbenzene and pore forming agent, the phase separation appeared earlier and the gel point also appeared earlier. The separated macromolecular chains are ...

• 2022-10-17

Strong acid cation exchange resin is made by sulfonation reaction, introducing sulfonic group into the benzene ring of cross-linked polystyrene. The sulfonation of aromatic rings is a typical electrophilic substitution reaction. In addition to concentrated sulfuric acid and chlorosulfonic acid, sulfur trioxide and oleum can also be used as sulfonating agents. Therefore, in addition to our most com...